How To Reverse A Freezer Door?

The option of reversing the door is available on most freezer appliances. This is very useful because you can reverse the door to suit your needs.

We consulted with experts to come up with a step-by-step guide on how to execute it successfully.

Unless your freezer has in-built ice or water dispensers, most freezer doors are not reversible. 

You might want to reverse it because the door is hitting a wall or cabinet, or you might just want to open it from the left, as most freezers do.

The steps below will allow you to reverse the door correctly.

• Unplug the freezer.
• Remove all the food and liquids.
• Remove the freezer door.
• Reposition the adjustable foot.
• Reposition the hinge housing.
• Reposition the freezer door.
• Reverse the door handles.
• Let it stand for at least 4 hours.

Continue reading to understand the basic steps of reversing your freezer door, even though each freezer model has its set of instructions in the manual.

How To Dismantle And Reassemble Your Freezer Door Properly?

Keeping track of the process of taking apart the door and putting it back so that the door fits correctly is your fundamental aspect.

It will take you around an hour to complete the job and you will need a wrench and screwdrivers.

If you follow the basic guidelines below, you will be in a better position to reverse the freezer door.

Unplug the Freezer

The electric cord from the electrical outlet to the freezer needs to be disconnected for your safety. It’s possible to prevent a potential electrical shock by doing this.

Remove Food and Liquids

It’s easier to work on the freezer when it’s not occupied. All food and liquids need to be removed to prevent food liquids from being contaminated.

Remove the Freezer Door

If you want to remove the plastic hinge from the freezer, you need to remove all of the plastic covers and locate the plastic hinge.

Lift the door so that the door from the main freezer can be disconnected. The door and its hinges should be placed in a safe location.

Reposition the Adjustable Foot

Remove the hinge pin from the bottom of your freezer and position it in the hole next to it using a wrench.

Lean the freezer at 45 degrees in the spacious area that someone is helping you to hold. Allow it to lie flat on its back if it is a small freezer.

Attach the screws from the foot that’s opposite to the foot that’s at the bottom, and then remove the foot hinge.

Reposition the Hinge Housing

Reposition the hinge housing on the opposite side of the freezer door by removing it from the top of your freezer.

The housing at the bottom and the stopper at the top need to be removed.

If you want to put the metal stopper on the opposite side of the door, you have to remove it from the hinge housing hole.

Reposition the Freezer Door

Make sure the top hinge of your freezer door is in its housing when you screw it into its new position by holding it in position.

Reposition the Door Handles

If your freezer has handles, remove them and put them on the opposite side.

Let It Stand for at Least 4 Hours

If necessary, adjust the front feet to create a balance, and stand your freezer upright. Make sure the hinges are tight but not too tight by checking the screws.

If the door is aligned properly, place the plastic covers back and make sure there are no gaps that allow air to enter the freezer.

If the door is easy to open and close, it’s time to check it. It’s best to allow it to sit for at least 4 hours to allow the system to calm down before you switch it on.

You can put your food and liquids back in when the temperatures return to normal.

Is It Possible That All Fridge Freezer Doors Are Reversible?

Not all fridge freezer doors are made of the same material as the freezer doors.

They could also have water or ice dispensers built into the door, preventing the possibility of it being reversed.

If there is a need for you to reverse the door, you can do it without the ice or water dispensers.

What Is a Reversible Door on a Fridge Freezer?

It’s possible to change the direction the door swings open with most fridge freezer appliances. If your door swings open from the left to the right, that’s what this means.

It’s possible to reverse the order so that it opens from the right to the left. This can be accomplished by removing the bolts and screws from the door.

To make sure the door opens and closes without any problems, keep a record of all the parts you remove so that you can reassemble them in the correct order.

How to Reverse a Fridge Freezer Door?

reversing the door of a freezer is the same as reversing the fridge freezer door.

You need to reverse the fridge and freezer doors so that they both open and close from the same direction.

If you have a bottom or top-mounted fridge freezer, it’s important to follow the basic steps of reversing the doors mentioned in your manual since models are different.

How to Reverse an Upright Freezer Door?

The door of an upright freezer can be reversed as well.

Carefully following the instructions in your manual will allow you to use the same concept as reversing a bottom or top-mounted fridge freezer.

It’s always a good idea to keep the parts, screws, and bolts out of the way and keep an eye on the order in which you dismantle the door to reassemble it in the correct order.

Conclusion

There are several reasons why you would want to reverse the door of your freezer or fridge freezer.

It could be that you just purchased a freezer and are left-handed, and prefer a more comfortable position to open it.

Or it could be that your kitchen isn’t big enough or that you have too much stuff in the freezer that keeps banging against a cabinet or a wall.

The good news is that reversing the door can be done easily as long as you follow the instructions in the manual and follow the basic steps of removing and putting back a door.

Extra caution should be taken during the process not to misplace or lose any part, screw, or bolt.

This is to make sure that your freezer functions as it did before reversing the door, by placing everything in its correct position and firmly securing it.