When it comes to cleaning utensils and dishware, the dishwasher is great because it does a lot of the work for us and we don’t have to worry about scrubbing here and there.
This machine must be in every home, but there are other things you should never put in it.
Unless the parts are marked “dishwasher safe”, don’t put your meat grinder in the dishwasher as it will ruin it by rendering the cutting surface blunt, stripping off the aluminum shiny finish, and becoming dull gray.
Not only that, you could end up picking some gray bits from your ground meat.
If you see a dull gray on the grinder when you take them out of the dishwasher, it is a sign that the grinder has been damaged.
You will begin to see powdered residues from them once it has developed aluminum oxide.
If you spot this, then the next best thing to do is to run bread through your grinder so that you can use it again to ground things.
The oxides that have been deposited in the grinder can be removed with the help of running bread through the auger.
It is important to participate in this exercise so that you don’t end up picking up some of the grey elements in your ground meat.
Here’s What Happens
Most dishwasher detergents contain alkaline phosphatase, which are no longer new. They can clean or remove stains from your dishwares with the presence of this phosphate.
When the hard detergent comes in contact with the aluminum, it causes it to collide with each other, which causes the oxidation process to be sped up.
How Can I restore the Dull Gray Color Off Your Meat Grinder’s Part?
There isn’t anything you can do to restore the aluminum shiny finish of your meat grinder part once it’s dull, but here is a little something I found and I think might help.
If you want to make a paste with a Cream of Tartar, you have to get it. If you want to work the paste on the dull parts, you can use an old toothbrush or nail brush.
When the shine has been restored, do this for a few minutes. Don’t forget to rinse and dry after you’re through.
Put the parts of the solution in the boiling water for 10 minutes. After 10 minutes, remove the parts from the solution, and then brush them with a wire sponge.
When they become shiny, do this. If you want to do this, you can soak the affected parts in a bowl of white vinegar for a day or two, then brush them gently the next day.
The dull colors should come off by then. It’s possible to mix the cream of tartar with a liquid. Baking soda can be used to make the meat grinder attachment shiny again.
You can make a paste with baking soda and brush it with a toothbrush. Toothpaste is an easy way to remove dull grey from your grinder.
The surface should be brushed with a brush. If you didn’t like what you saw, try soaking the parts in hot water.
Right Way To Wash A Meat Grinder
I know how lazy you can get, but I don’t want you to think that putting your grinder in the dishwasher is the best way to get rid of it.
The best way to clean a meat grinder is to manually wash them.
How to clean your manual and automatic meat grinder yourself and what you need can be found here.
- Slice bread
- Brush or sponge
- Dish soap
- Dry towel
If you clean a meat grinder after you use it, the fats in the meat will stick harder, which will make it easier to clean. You will need to feed a few slices of bread into the grinder to clean it.
This will help soak up the fats and possibly push out other tiny bits of meat and prepare for the next step. It is necessary to disassemble the machine before this is done.
Once you have fed the bread through the grinder, it’s time to disassemble it. Take note of each part and where they fit when you disassemble.
Take a big bowl of water, add some liquid detergents, and place the disassembled parts in it. You should let it sit there for about 30 minutes before you wash them.
It’s not enough to keep them soaked, brushing the parts will help take out most of the residue so be sure to pay attention to the details here and don’t be in a hurry while at it.
The first thing to do is to carefully brush each part, starting from the auger and going all the way to the cutting blades.
Be extra careful handling the grinder’s blade because it is very sharp.
It is time for you to rinse each part carefully after you have washed them.
Before setting them out to air dry, make sure each part is dismantled through running water, wipe each part dried with a clean towel, and then set them out to air dry.
Once dried, you can put your grinder in a cool dry place or store individual parts in a bucket full of dried rice. This will keep it from rusting.
What Dishes I Can’t Wash In The Dishwasher?
Do you know that some dishes can’t be washed in the dishwasher? Continue reading to learn what not to put in a dishwasher.
- It’s not a good idea to use aluminum in the dishwasher as they tend to react to hot temperatures and harsh detergents, leaving them with a dark grey coating.
- plastic and wooden materials should not be washed in the dishwasher. Wooden material may take in too much water, while plastic may expand beyond its limit.
- Crystal dishes and souvenirs, cast iron cookware, dishes with a vacuum lid, knives, blades, and sharp-edged tools are just some of the items that are not dishwasher safe.
Is The KitchenAid Meat Grinder Dishwasher Safe?
The KitchenAid meat grinder is dishwasher safe but to be on the safer side, you should wash them yourself so as not to ruin them.
It is a good idea to have a dishwasher in your home, but certain items should not be introduced into it.
The meat grinder parts may become dull and blackened when they come in contact with high temperatures and harsh detergents in the dishwasher.
If you want to be on the safer side, you should wash your grinder yourself and avoid using a dishwasher.
Hope this will help. Don’t hesitate to leave a comment if you have any questions about this topic.
Foodie and a passionate cook, I am here to share all of what I know about cooking, kitchen, and food prepping.
Follow me for delicious and healthy recipes.