How Fast Should A Meat Grinder Turn?

The power output of the meat grinder’s electric motor determines how fast it will turn.

Smaller and less expensive meat grinders are more likely to grind as much meat as possible in an hour, while industrial-sized meat grinders are more likely to grind as much meat as possible with super powerful electric motors.

However, other factors can determine how fast your meat grinder turns, these are:

Factors Influencing the Speed of Meat Grinders

Power Input

Every meat grinder has a minimum and maximum capacity that it can run at. The meat grinder will not work if the electrical power supply is less than the requirement.

When purchasing a meat grinder, read the manufacturer’s guide to figure out the required voltage.

You have to install an outlet that can sustain the level of power that you are going to be running at.

The meat grinder will work at the speeds which you need when you check the boxes.

Size of Meat

When you put large chunks of meat into the feed tube, it will take more effort to break them down into smaller pieces than if you just put them in the meat grinder.

If you want to maximize the efficiency of your meat grinder, you should chop the meat into small bite-size chunks, because the larger the chunks of meat, the slower the meat grinder will turn.

It will help the process nicely if you chill the meat for a little while before grinding if you want to be a bit extra, which is recommended.

The easier the meat is to pass through the blades and plate, the harder it is to eat it.

Electrical Motor

The power output of your meat grinder’s motor is what determines the speed at which it runs, most meat grinders are equipped with a powerful enough motor to get the blades turning fast enough to grind the meat into small bits.

It’s ideal for a small meat grinder to have electric motors that are between 0.75-1HP.

The meat grinder’s power output is not designed to carry the weight of the large gears of the meat grinder, so the blades will move extremely slowly.

This power output is sufficient to properly run a meat grinder of this size, and although you can use this motor for the #8, the size of the meat grinder, you can’t use it for the #32.

To get more work done, you need a large feed tube and gears to support the system.

Control Switch

When you put large chunks of meat into the feed tube, it will take more effort to break them down into smaller pieces than if you just put them in the meat grinder.

If you want to maximize the efficiency of your meat grinder, you should chop the meat into small bite-size chunks, because the larger the chunks of meat, the slower the meat grinder will turn.

It will help the process nicely if you chill the meat for a little while before grinding if you want to be a bit extra, which is recommended.

The easier the meat is to pass through the blades and plate, the harder it is to eat it.

Quality

A low-quality meat grinder will come with high specifications for a cheaper price, and although it may deliver on those for a couple of weeks, it will inevitably slow down after a few uses.

The speeds at which it turned would change a lot. Get the best meat grinder you can find, those are built to be more sturdy and will last.

Idle Speed

When there is no load in your meat grinder, the rate at which it turns is called the idling speed, and it is different from when you begin to grind meat in it.

If you run your meat grinder and it rotates fast, don’t expect the speed to stay the same even after you’ve started grinding, because the idle speed is usually a lot faster.

The meat in the grinder does not run as fast as the other way around.

Longevity

If you bought your meat grinder at a thrift store, you have been using it for at least a couple of years.

If the speed is not as fast as a brand new meat grinder, all the components have become weak at this point, and no matter how sturdy it is built, it can’t stand the test of time.

It is recommended to maintain your meat grinder to prolong its lifespan and to always service the components so it doesn’t fail while you use it.

Faulty Grinder

If the electrical motor of the meat grinder becomes faulty, it will affect how fast the meat grinder will turn.

If your meat grinder isn’t turning as fast as you’re used to, then it’s probably time to have it checked out by a professional.

If you need to replace any of the components, make sure you get the best replacement you can find, to get it back to its original efficiency.

Safety Tips

There are a few things to do before and after grinding that should not be ignored, and operating a meat grinder without proper safety gear can lead to injuries.

All Components Need to Be Attached Properly

Before plugging into an outlet running the meat grinder, make sure the parts are fastened correctly.

If there are loose parts when you start running the meat grinder, they may fall off and hit you.

Imagine biting into metal when you eat because a bolt may fall into your ground meat.

Wash Meat Properly

If you purchase meat from a butcher, make sure you wash it thoroughly.

You don’t know where the meat has been to make it as sanitary as possible and avoid food poisoning, wash the meat properly This step is vital and can not be ignored.

Wear Gloves

Don’t forget to wear gloves when grinding meat with a meat grinder, not only for your safety but for other people as well.

It becomes more difficult to get cut by the parts of the meat grinder when you wear gloves.

Gloves make it more sanitary, when you use your bare hands you may transfer germs into the meat.

FAQs

Is It Possible to Use My Stand Mixer to Grind Meat?

Some stand mixers come with sausage stuffing kits and a meat grinder, which you can use. There is a stand mixer that you can use to extrude pasta.

You can use your KitchenAid stand mixer to grind meat with the meat grinder attachment.

Why Is My Meat Grinder Not Working?

There are two things to look out for if your meat grinder isn’t working, first is it plugged in correctly, and second is the power running through the outlet.

If your meat grinder motor is fried from a power surge, you can either take it to a professional or do it yourself if you have the tools.

Do I Need to Leave My Meat Grinder Plugged in After Using It?

Don’t leave your meat grinder plugged in when you’re done grinding, as soon as you can, fold the cord up nicely.

Make sure you store it in a box away from where it can cause you to trip over. The meat grinder can be ruined by power surges.

Why Does My Meat Taste Weird After I Grind It?

Your food processor is dirty, or the meat itself is bad. If your meat tastes weird, it is probably a sign that you should throw it away or feed it to your pet if you think it is safe enough.

Is It Possible to Grind Meat with a Food Processor?

You can use a food processor that is powerful enough to grind meat. If you own a food processor, you need to have some ground meat.

All you have to do is chop the meat, wash it, chill it, and then grind it in the food processor.

Conclusion

If you need a meat grinder that can grind a lot of meat in a short period, the speed of the grinder is different depending on the model and size.

There is a powerful electric motor that you can purchase. Good luck!