Breville Barista Touch Hidden Problems & Solutions

Breville Barista touch is generally considered to be powerful and efficient, but it can give problems when you least expect it.

The number of reviews about the barista online shows that this is the case. Sometimes these problems are a result of technical error or human error.

If your Breville barista develops a problem, you can fix it yourself with do-it-yourself methods. Continue reading for more information.

Breville Barista Touch Problems

If your Breville barista develops a problem, it doesn’t necessarily mean that they are damaged. Without the help of a professional technician, you can fix it on your own.

Check out this article for some of the day-to-day problems of Breville baristas, and what you can do to resolve them.

Touch Does Not Dispense Water

When you want to make coffee, you should know the importance of water.

When you want to make a coffee, the barista doesn’t give you water or there is no hot water, it is usually worrisome. Do not freak out when such happens.

It could be that the tank is empty, the machine needs descaling due to hard water build-up, there is a mistake in the way you put the tank in, or there is a problem with the coffee basket.

The Breville barista isn’t able to give water with any of the following steps.

Refill the Tank

The water tank should be checked when your Breville barista doesn’t give water. If the water is low or there is no water in the tank, you should refill it and try to make coffee again.

Lock Water Tank in Place

If there is water in the tank and the barista doesn’t give it to them, it could be the position of the tank. The water tank can be pushed down until it is locked up.

Descale

If the problem persists after you tried the steps highlighted, you can descale the machine to find the cause.

If you want to do this, you need to empty the water tank, get fresh water into the tank and add the descaling solution as instructed.

Afterward, go to settings, select descaling, and follow the instructions.

The Machine Leaking Water

The Breville barista touch is not an exemption for this problem with most barista machines. After espresso and steam function the machine could leak water into the tray.

It could leak water if the water tank is not locked in the right position or if there is a need for you to replace the shower screen silicone seal.

The following methods can be used to fix this problem.

Lock Water Tank in Place

When the machine leaks water and you don’t find the source, you should push down the water tank until it is locked in place.

If there is any other sign of water leaking, you should check it again.

Empty the Drip Tray

If there is a signal or instruction, you should always keep an eye on the indicator. Push down the tray and empty it as soon as you can when it displays empty me.

Makes a Loud Noise

The Breville barista’s touch is likely to make noise when the water doesn’t come through. Lack of water in the tank could be responsible for this.

It could be caused by an error in the purging setting. The steps highlighted below can easily fix this.

Refill the Tank

When the water level is low, the machine can make loud noises, which is the main thing that makes it work.

If you want to repeat the process, you should refill the tank with water. Since there is water in the tank, the noise should stop immediately.

Reset the Machine

Once you have filled the water tank with water, the machine should stop making noise and you will be sure that the tank is in the correct position.

If the problem is not solved, you should reset the machine. All you have to do is go to settings and click on the factory reset.

If the machine makes noise again after putting everything in place, it’s time to put it back in place.

Coffee Is Not Hot

When you want to drink hot coffee and the machine can make it for you the way you want, there is a sense of satisfaction.

If the Breville barista does not make hot coffee the way you want it, this could happen because you failed to preheat the cup, the portafilter, or adjust the water temperature.

There are a few things you can do to make it better.

Rinse Cup with Hot Water

You should rinse the cup under the warm-water outlet if you want to take a hot coffee.

You should rinse the portafilter under the hot water outlet after placing the cup on the warming tray. You have to dry it thoroughly before you use it.

Adjust Temperature

If you can’t resolve the problem after attempting the method above, you should adjust the brew temperature.

The only thing you have to do is to go to settings, then the menu, and choose the temperature. After this, you should get a hot cup of coffee.

Lack of Cream

It is possible if the pre-ground coffee isn’t fresh or it is grounded too coarse, or if you use a single filter basket for the pre-ground coffee.

You don’t like the look of the coffee when this happens. There are several ways to fix it.

Use Fresh Coffee

Make sure you only use fresh coffee beans if possible. You need to finish it within the next two weeks.

Make sure you finish your coffee within a week in a situation where you are using pre-ground coffee. Alternatively, you can adjust the machine’s settings.

Unlock the Filter Basket

If your coffee doesn’t have cream because the filter basket is blocked, you should use the pin at the end of the unblocking tool to open the basket.

If the problem doesn’t go away, you should clean the filter basket. The only thing you need to do is to get some hot water and make a cleaning tablet out of it.

The portafilter and the filter basket should be soaked in the solution for a minimum of twenty minutes.

Use Dual-wall Filter Basket

You should use the dual-wall filter basket if the coffee still lacks cream after you have tried the steps mentioned above.

Safety Precautions

Some precautions should be taken when handling the Breville barista touch. There are several tips you can follow.

• The brew chamber should not be opened once the machine is in use to avoid injury and other dangers. Make sure you only use the machine in an open area.
• Plugging a damaged power cord into an electric outlet can cause electric shock and fire disaster. If the power cord is damaged, don’t use the machine, and make sure to check the power cord before you use it.
• Before you clean the machine, plug it in from the electric outlet and make sure it’s not in use. If you want to keep the power safe, leave it on the table, or any other location where children or pets can play with it.
• It is recommended that you only use the Breville barista touch inside. Don’t use it outdoors on a moving vehicle or a boat. This will increase the lifespan of the machine by avoiding potential danger. Make sure you keep a close eye on the machine whenever you use it with little children.
• If there is an impending danger, the location where you use the machine could determine that. Don’t use the Breville barista touch near an electric burner, hot gas, or a heated oven.
• If you want to clean the machine after use or take off its parts, you should allow it to cool down first. Before you begin cleaning, make sure the machine is turned off and out of the electric outlet.
• To avoid danger, do not use the machine in a damp location, submerge the machine, or plug the machine into water.

Conclusion

If you could read and follow the user’s manual, you should not have any problems with the Breville barista touch.

You can easily fix the machine with any of the steps highlighted in this guide.