Why Does My Pepper Grinder Not Work?

There are a lot of reasons why your pepper grinder won’t work.

It could be a rusty burr, a clogged grinder, an over-tightened knob, or even a lack of maintenance on the grinder.

There could be a mechanical or electrical issue that causes the grinder to malfunction or not work. Below are some of the things that are discussed.

Reasons

Lack of Maintenance

Some people don’t mind using their pepper grinder for as long as they want, without the thought of cleaning it. Other people clean them once every few weeks.

You need to pay more attention to your grinder than that.

It’s a good idea to keep your grinder away from the water to avoid a malfunction, but regular cleaning and maintenance are more important than keeping the grinder away from the water.

After every two to three times you use the pepper grinder, it’s a good idea to clean it.

Over Screwed Knob

The top knob of your pepper grinder can be too tight, which can cause it to not work the way it is supposed to.

If you want to have a coarse grind, you can change the top metal mechanism of your grinder to the left or right. Don’t make it too tight or too loose for the grind you want.

Clogged Grinder

When you store pepper in the grinder, it will leave some of its particles in the grinder.

The small particles begin to form an army of themselves which will eventually become the base cause of a faulty grinder.

When these particles are left untouched, they can bake and create a softer version of themselves.

They get stuck on your grinder burr or within the walls of the grinder once that is accomplished. The malfunction of your grinder will be caused by this.

Don’t grind your peppercorns when they are wet because they won’t come out smooth from the grind, this will allow for them to clog unto your grinder.

The leftovers can easily be united against the grinder mechanism and cause it to malfunction.

Rusty Burr

To make metal rust, it’s best to subject it to wet weather. Once a metal is subjected to or submerged in water without proper drying, they begin to pick up a brown look.

The water components do not share the same chemistry as metal.

Water can cause the metal to oxidize. If your pepper leaves some oily components in your grinder, it could cause your burr to rust as well.

Bluntness

A blunt burr in a pepper grinder is like a Python without teeth, harmlessly hunting its prey.

The gum just keeps rubbing off the prey’s skin, causing little or no effect, and now all she has to do is sit and wait for the day that the prey dies from hunger.

The burr becomes useless in the case of a burr. If you smoothen your pepper, it will cause more clogging in the grinder. There was a problem.

Your peppercorns will not be affected by a grind or smoothening when you have a blunt burr. They may be split into large tiny particles.

Technical Problem

A misplacement of the grinder’s mechanical items could be the cause of a malfunction when your pepper grinder has fallen for some time.

Every single fall, the pepper grinder mechanism begins to lose its position. If a knot loosens, it will cause your grinder to lose its grip and composure.

It’s possible that a wire isn’t firmly connected to the right place because of the fall it has experienced.

How to Fix a Faulty Grinder?

If your pepper grinder stops working, there are a few things you should consider.

These tips should help prevent you from falling victim to a faulty grinder, but I think there is a way out for you if you’re already there.

Regular Cleaning

The best way to maintain the perfect working state of your grinder is through this method.

You will always have a smooth and perfect grind if pepper residues are not allowed to accumulate in your grinder.

It is implied that you should always clean the pepper grinder with a dry towel or cloth.

If you need to use water, make sure to dry it off by keeping the mechanism out under the sun or using the dryer.

I would prefer that you dry your grinder mechanisms with water. It is natural to have no risks or consequences.

If you dry your pepper grinder mechanisms in your dryer, it could cause scratches and damage.

Adjusting the fill

If you notice that your grinder is not working or has a fault with smooth grinding, one of the first things you should do is check the amount of pepper inside.

It’s a good idea to confirm whether or not the appropriate amount is in there. Small and large grooves are what pepper grinders are structured for.

They have differing abilities for accommodating a grind.

To avoid a malfunction, make sure you take notes, measure, and stick to the number of peppercorns you can fit into your grinder.

Before or During a Grinding, Check for Softened Peppercorns

Peppercorns go through a drying process which makes them hard to eat. They will usually submit to the voice of the grinder blade when they are completely dry.

When they are moist and soft, they can be stubborn enough to cause a problem with your grinder.

This is true because the blade slips right through the soft skins and makes grinding rough.

The peels that were not completely grounded will eventually form the base of the grinder’s clogging agents.

If you notice that your grinder is not working, then you should put the peppercorns into a safe dish and microwave them to make sure they are moist.

FAQs

Is It Possible That Pepper Grinders Wear out?

A wear-out at an early stage of purchase is very unlikely. The burr mechanism of a pepper grinder is made of hardened steel with high carbon material and it is sharp.

This makes it harder as well. For the burr mechanism and the grinder’s body, there is a lifetime warranty. The body is the most likely to wear out first.

Is a Pepper Grinder Worth It?

They have been thought of as a healthier source of creating and Blending your spices. The best spices for your S&P will be created by it.

It can be used to store spices without fear of being contaminated, as it does not mess with the freshness of your ground pepper.

If you want to figure out the worth for yourself, you should use a pepper grinder.

How to Change the Grind Size on a Pepper Mill?

If you want to adjust the grind size of a pepper grinder, you can tighten or loosen the silver nut.

If you want a large grind and slightly loose/tight for a medium grind, you should leave the bolt loose. If you want to make a fine grind, you need to twist the bolt tightly.

How to Clean a Cole and Mason Pepper Grinder?

If you want to clean your pepper grinder, use a damp, odorless, but not wet towel or cloth.

The grinder mechanism should not be submerged in water for any reason and should not be subjected to regular contact with water.

After you clean your grinder, dry it straight. This is needed to prevent the burr from being rusty. The Cole and Mason pepper grinder is very good and you should check it out.

Is It Possible to Put Salt in a Pepper Grinder?

The structure of the pepper grinder is very different from the structure of the salt grinder. The pepper grinder has grooves that can be used to improve a good grind.

Salt in a pepper grinder can cause corroding effects on the metals of the pepper grinder, and the mental strength of a salt mill may not be strong enough to resist the hardness of the pepper grinder.

It is implied that it is safer to grind pepper in a grinder that is specifically designed for that and salt in the salt grinder.

Maintaining and ensuring long lasting-ness in the grinder will be helped by this.

Conclusion

A faulty grinder can be a result of the pepper particles in the grinder.

When you notice that your grinder isn’t working well or stops working, do not panic, just find out the possible cause and the perfect solution for it.

The grinder was not structured to break down easily but with a little bit of handling, they could eventually stop working.

If you notice a problem with your pepper grinder at the beginning, you need to check it out regularly and fix it.