What Kind Of Oil To Use In A Meat Grinder?

The use of oil in locomotive machines is very important if you want a lot of things to go well with your appliance, but the real question is what kind of oil do you use to ensure they are in good working conditions?

If you are one of the millions of people who want to know what kind of oil I use in my meat grinder, then this is the answer for you.

Many brands come to mind, but make sure the choice you choose has mineral oil as its main ingredient. 

Mineral oil in spray oil bottles can help to prevent rust and oxidation, which can be detrimental to the lifespan of your meat grinder.

Importance of Oiling Your Meat Grinder

One of the most important reasons you should oil your meat grinder is to prevent it from rusting.

Rusting reduces the lifespan of your meat grinder by almost one-third, and if not done adequately, you might end up having the same issues that you were running from.

It makes rotation easy

This is true when it comes to the manual grinder. The worm mechanism in the food tube of the manual meat grinder needs lubrication before it can function properly.

If done properly, oiling the meat grinder will reduce the amount of force used in rotating the handle for an effective grind by half.

Saves you money in the long run

lubricating your meat grinder will make sure you don’t have to spend more money on a meat grinder in the future, like the old saying “penny wise pound foolish.

It also means that you don’t have to worry about budgeting for items to remove rust from your meat grinder.

It makes storage easier

Storage becomes something you look forward to with relative ease with the lubrication of your meat grinder parts.

The working principle of your meat grinder will be adversely affected if the meat grinder is not properly stored.

How Can I Maintain and Store My Meat Grinder?

Below, I will show you how to maintain and store your meat grinder to make sure it lasts longer than anticipated.

Materials Needed

• Slices of bread
• Rice
• Warm soapy water
• LEM Products 686 Grinder Cleaning Kit
• Plastic bag
• Mineral oil
• Sponge
• Dry rag
• Bleach

Step 1:

Meat oil can be found in the food tube of your meat grinder if you grind slices of bread.

The bread helps to absorb the oil and also takes out meat from the food tube. A few slices will get the job done.

Step 2:

Use the instruction manual as a guide to disassemble your meat grinder after grinding the bread.

There are particles of food and bread that can be seen and you can remove them with a brush.

Step 3:

The parts should be soaked in warm soapy water for at least 30 minutes to make them easy to wash.

If you have an electric meat grinder, you should only soak the parts that can be removed if you want to avoid damage.

Step 4:

The tough stains should be easy to remove by now if you use your bottle brush and sponge to wash the parts.

The bottle brush can be used to gain access to areas you can’t reach with your hands and sponge. It’s a good idea to wash the blades to avoid any injuries.

Use the kitchen tap when running at high pressure and rinse with clean water when you are down.

Step 5:

Ensure that you use a towel to dry the parts after rinsing them. It’s a good idea to place your kitchen table on the floor for proper air circulation.

Step 6:

The meat grinder’s pushers and screws come in contact with your meat during the grinding process, so lubricate them once they are dried.

You can use a spray bottle to get the oil on the parts or use a painter’s brush.

Step 7:

Put the oiled parts in sealable plastic. The rice will help absorb any form of humidity that is still present after the process. Ensure the bags are well sealed.

Step 8:

It is no longer news that meat grinder parts are more efficient when they are cold if there is enough room in your refrigerator.

You won’t have to place your grinder in the refrigerator before you use it.

If you don’t have enough space in your fridge, you can store the parts in a dry place, but make sure you keep them refrigerated to get the best results.

If your meat grinder is electric, don’t keep it in the refrigerator as it can get damaged if you store it there.

Step 9:

Before you use the meat grinder, make sure the oiled parts are sterile.

If you want to use bleach on parts that have been oiled, you need to measure a liter of bleach, mix it with 3.8 liters of water, empty a spray bottle and spray on the oiled parts.

Before you assemble your meat grinder, rinse the parts with clean water to remove the bleach.

Tips

• If you are a fan of Silverskin, or you simply feel lazy removing them before grinding your meat, the research I made suggests that grinding your meat with the Silverskin in place will have a detrimental effect on the sharpness of your grinder blades
• If you freeze your meat before every grind to make it easier for your blades, you can do the same thing for your grinder blade as well.
• Don’t use a dishwasher to wash your meat grinder parts. The heat involved in the process can damage the parts and leave them in water for a long time which can cause rust.

How to Get Rust out of a Meat Grinder?

Perhaps, your meat grinder has stood the test of time and as a result, there is rust in certain areas, use the following methods to get the best result possible.

Using Brush – Materials Needed

• Red meat
• Wire brush

If the rust has not eaten deep into the metal, you can use a brush.

To get a wire brush and scrub the area where the rust appears, make sure the part is not wet as you want to brush these parts.

Most of the red meat should be ground in the areas with the fat. If you want to avoid future occurrences, try cleaning and drying the parts of your meat grinder.

Use Saltine Crackers – Materials Needed

• Saltine/soda crackers

If used correctly, saltine crackers can help remove rust. After grinding your meat, run some saltine crackers through the feed tube of your meat grinder to remove rust.

Saltine crackers are made from yeast, white flour, and baking soda, which are active ingredients that help combat rust.

Use Vinegar – Materials Needed

• White vinegar
• Stainless steel brush
• Baking powder
• Mineral oil

Severe cases of rust prefer the use of vinegar. To get the best result, follow the following steps.

Step 1:

After grinding, disassemble your meat grinder and clean it. If you want to carry out the next step, make sure you carry out the normal cleaning procedure.

Step 2:

The parts that are rusted should be soaked in white vinegar to remove the rust.

If the parts are rusted, soak them for as long as possible, and then remove the parts from the vinegar and brush them clean.

If you want to get the best result for severe rust, you’re advised to use a STAINLESS steel brush.

Step 3:

After scrubbing, use a ratio of 2:1 for baking powder and water, then soak the rusted parts for another couple of minutes.

The baking powder will help to remove any acidic debris that has been deposited. You need to use hot water for the best results.

Step 4:

The first segment of this article explains how to prevent a future occurrence of rust from your grinder by applying mineral oil to the parts after the treatment of the baking powder and vinegar.

Use Bar Keepers Friend

The use of the Barkeeper’s friend will remove the rust from the affected areas and give the meat grinder a shining look.

After cleaning with Bar Keepers friend, use water to remove the chemicals, then make sure the parts are dried.

How Can I Remove Rust from the Disc of Your Meat Grinder?

Depending on how you look at it, the disc of your meat grinder can mean different things.

It can be difficult to remove the rust from this part of the meat grinder, but having these materials below should help.

• Rubber hand gloves
• Putty knife
• Vegetable oil
• Empty spray container
• Wire brush
• Needle file
• Dish soap

Step 1

It’s a good idea to put on rubber gloves to prevent injury.

Step 2

If you want to remove the bits of meat on the disc plate, you need to disassemble the meat grinder and ensure they are washed.

Step 3

Proceed to use your wire brush after spraying some vegetable oil on the disc. If you want to get the best result, scrub thoroughly and try scrubbing in a circular motion.

Step 4

After applying the oil to the disc for a second time, you can use a small file to scrub the circular holes on the disc.

Use a needle file to clean the smallest hole on the disc, and make sure you scrub thoroughly as well.

Step 5

To clean the disc, use dish soap and water, and a sponge.

Before you store the disc, make sure it is completely dry by rinsing it in clean water. Rub the blades with mineral oil before they are put into storage.

FAQs

How to Keep Meat Grinders from Clogging?

Carrying out the following steps will help prevent your meat grinder from getting stuck.

• Before grinding, you need to remove excess fat and Silver Meat from the grinder.
• When you need to sharpen your blade, always clean your meat grinder.
• It is important to not let it get too blunt before you do the needful.
• Feed your meat grinder with enough capacity to handle it.
• To drive home your point, you don’t have to feel it to the brim.

How to Maintain an Electric Meat Grinder?

The electric meat grinder’s motors should not be soaked in water. You can clean the blades and other parts by dismantling and cleaning them, then lubricating them before storing them.

A damp rag and a dry towel can be used to clean the motor section of the electric grinder.

What Is the Use of Food Grade Silicone Spray?

Food-grade silicone spray is classified as safe to use in food processing plants. odorless, tasteless, and colorless for consumption are some of the qualities of these lubricants.

They can be used to keep parts of your meat grinder in good shape.

Conclusion

If you want to keep the possibility of rusting to a minimum, oiling your meat grinder parts is important.

Let me know if you have any questions, thoughts, or observations in the comment section, as I hope you follow the storage tips shared in the course of writing this article.

I would like to hear from you. Cheers!!!